Description
The LED camping light is a practical helper for all outdoor activities where there is no power outlet within reach. Usable with 4 pcs AA batteries (not included).
Features
“This lamp brings light into the darkness: The Büchel BLC 820 is a powerful battery headlight for a manageable price – and the test winner in the test field.” That is the verdict of Radfahren.de after their extensive test of 22 battery-powered headlights. We’re very happy!
Here’s the link to the review (in German only): https://www.radfahren.de/test-teile/buechel-blc-820-test/
“COB” stands for “Chip on Board”. “Chip” here means the small LED (light-emitting diode). This is applied directly to the “board” (see PCB – Printed circuit board) together with a few more LEDs. In the case of the Micro Lens COB, for example, there are 40 of them. This technology enables a modern light pattern design for rear lights.
LED – “Light emitting diode”. It has now completely replaced the incandescent bulb. The advantages of the LED over the incandescent bulb are a much longer lifetime and robustness in the event of shocks. And all this at only about one tenth of the energy consumption.
PCB – “Printed circuit board” is a carrier of electronic components, such as capacitors, resistors, sensors and also LEDs. It is found in virtually every electronic device, including our bicycle lights. In dynamo front lights, for example, the capacitors for the stand light function are found on the PCB. In the case of rear lights, the sensor for the StopTech brake light function is located there, for example, as in our “Edge” brake light.
Cathodic dip coating (CDC) is an electrochemical coating method. The component to be coated (in our case: bicycle spokes) is immersed in an electrically conductive paint bath. After being exposed to an electrical voltage, paint particles are deposited on the component. The paint particles form a uniform paint film over the entire surface. The paint film increasingly insulates the component and ultimately stops the electrical attraction. After the paint layer has been applied, thermal treatment takes place in a specially designed curing oven. The resulting coating provides effective and long-lasting corrosion protection with high temperature and chemical resistance. It is scratch-resistant and safe against stone chipping. Various pre-treatments further improve the corrosion protection and create an excellent adhesion base for the CDC process.
In the industry, cathodic dip coating is considered one of the most efficient coating processes for metal surfaces. As the solvent is based on water and the paints are free of lead and zinc, this is a particularly environmentally friendly surface coating.
Wir suchen Sie für unseren Standort in Barchfeld/Thüringen als
Bitte senden Sie Ihre Bewerbungsunterlagen unter Angabe Ihrer Gehaltsvorstellung und des frühestmöglichen Eintrittstermins per E-Mail oder Post an:
Büchel GmbH & Co. Fahrzeugteilefabrik KG
Personalabteilung
Niesiger Str. 115
36039 Fulda
hr@buechel-online.com
https://www.buechel-online.com
“The economic landscape of eastern Hesse is full of surprises: In inconspicuous residential areas reside global players that are successful on the market worldwide. This is also the case with Büchel, a producer of bicycle parts since the 1920s and now active worldwide with more than 1,000 employees.” This is the introduction to the recently published company portrait on osthessen-news.de.
Here is the link to the article (in German only): https://osthessen-news.de/n11655286/wirtschaftsgeschichte-rund-ums-rad-buechel-produziert-fahrradteile-weltweit.html.
Many thanks to Osthessen-News and Marius Auth!
The starting signal was given in 2001: Patricia Ebert joined us as a trainee in wholesale and foreign trade and completed her training with the “Best in the Profession 2004” award from the Chamber of Industry and Commerce. As Patricia had already learned to appreciate team spirit, the working atmosphere and the opportunities for further training during her apprenticeship, she remained loyal to the company and has since been involved in the import department. From the beginning, Patricia Ebert accompanied the joint venture U-Star with our Chinese partner and today she is also employed in particular for the support of major customer projects. The management presented her with numerous congratulations and a gift.
Description
The luggage carrier with integrated rear light. Inspired by the automotive industry, the “Nightrider” is a novelty on the world market. It is equipped with a flush integrated LED strand. This design allows for a uniform light pattern, even in the smallest areas. The LED strand is integrated into the tube design, which gives the carrier and thus the entire bike a clean, modern look. In addition, the light is optimally protected against impacts and other external influences. The arrangement of the LED strand in the carrier is protected by patent.
The STOPTECH brake light function is a joint development with the Fraunhofer Institute in Dresden. The sensor technology, which detects the deceleration of the speed during the braking process, makes a connection to the braking system via cable superfluous.
Features
Individual production according to your specifications.
Description
LED battery rear light “Tivoli Battery” according to StVZO with integrated Z-reflector, luggage rack mount with adjustable screw spacing 50 mm – 80 mm, usable with 2 x AAA batteries.
Features
Description
LED battery front light “Vancouver Mini” with LED indicators for charge level and luminosity, StVZO approved. The light sensor automatically adjusts the luminosity to the ambient light and thus optimizes the operating time.
Features
Description
LED rear light form-fittingly integrated into the mudguard, with COB (chip on board) technology, i.e. a larger number of LEDs are arranged directly on the circuit board, resulting in a uniformly illuminated strip. Optionally available with intelligent brake light function “StopTech”. Approved according to StVZO.
Features